Dexcom, OmniPod, Medtronic, Diabetes Shop

SENSOR OVERVIEW
The sensor is placed under your skin and continuously measures your glucose
levels.
The sensor and transmitter (once snapped in place) remain on your skin for the
entire sensor session, up to 7 days.

TRANSMITTER OVERVIEW
The transmitter wirelessly sends your glucose information to the receiver. The
transmitter and sensor are water resistant when properly connected. Do not
throw away your transmitter. It is reusable.
The transmission range from the transmitter to the receiver is up to 6 meters
without obstruction. Wireless communication does not work well through
water so the range is much less if you are in a pool,
bathtub, water bed, etc.
The transmitter battery will last at least 6 months.
Once you see the transmitter low battery screen
shown on the right, replace the transmitter as soon
as possible. Your transmitter battery may drain as
quickly as one week after this alert appears.

RECEIVER OVERVIEW
The receiver is a small hand-held device that shows your sensor glucose
readings, direction and rate of change arrow and trend graph. The international
standard unit of measurement used for glucose testing systems (i.e., blood
glucose meters) is mmol/L (millimoles per liter). The transmission range from
the transmitter to the receiver is up to 6 meters.
Your receiver is rated IP22, which means that it offers some protection from rain
drops. Do not spill fluids on the receiver or drop the receiver into fluids. Keep
the micro USB port cover closed to help prevent fluid and dust from getting
inside the receiver.
Wireless communication does not work well through water so the range is much
less if you are in a pool, bathtub, water bed, etc.